Grade-A LiFePO4 Lithium Battery — 10.24kWh 51.2V 200Ah (Rack-Mount)
Double the storage, double the independence. 10.24kWh of Grade-A LiFePO4 capacity in a rack-mount ch
-8%
The itel Power Tank 1000Wh is a plug-and-play home battery that stores enough energy to power a typical Nigerian household for 8–12 hours. Grade-A LiFePO4 cells, 6,000+ charge cycles, and a sleek portable design.
For many Nigerian homes and businesses, power outages mean relying on petrol generators, rising fuel costs, and unwanted noise. The itel Power Tank 1000Wh offers a smarter, quieter and cleaner way to keep your essential devices running when the grid goes off.
This compact, all-in-one energy storage and backup power system combines a 1,000Wh (1kWh) LiFePO4 lithium battery with a 500W pure sine wave inverter and solar charging capability. It is designed for everyday essentials such as TVs, fans, lights, laptops, Wi-Fi routers, phones, POS terminals, CCTV systems and other compatible low-to-medium-power electronics.
Unlike a conventional petrol generator, the Power Tank produces no exhaust fumes and no engine noise during normal operation. It can be recharged from the electricity grid and, with compatible solar panels, through solar power as well.
| Parameter | Specification |
|---|---|
| Product | itel Power Tank |
| Battery Capacity | 1,000Wh / 1kWh |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Rated AC Output | 500W |
| Maximum Apparent Power | 600VA |
| Inverter Type | Pure Sine Wave |
| AC Output Voltage | 230V AC |
| AC Frequency | 50Hz |
| Solar Charging | Supported |
| Solar Controller | Built-in MPPT |
| Maximum Solar/PV Input | Up to 400W |
| Battery Cycle Life | Up to 6,000 cycles |
| UPS Switching | ≤20ms |
| Cooling | Intelligent fan cooling |
| Noise Level | <45dB at 1m |
| Battery Management | Built-in protection/BMS system |
| Protection | Battery fuse, grid over-voltage, PV over-voltage, overload, short circuit and over-temperature protection |
| Certifications/Standards | IEC62619 / IEC62368 / UN38.3 |
The Power Tank is designed primarily for essential electronics and appliances whose combined load remains within its 500W rated AC output. Actual runtime depends on the power consumption of the connected devices, inverter efficiency and operating conditions.
Important: The 1,000Wh battery capacity should not be confused with the 500W inverter output. The battery capacity indicates how much energy the Power Tank can store, while the 500W rating indicates the amount of AC power the inverter can continuously deliver. High-power appliances such as electric irons, kettles, electric cookers and air conditioners are generally unsuitable because they can exceed the Power Tank's rated output.
Runtime depends on the total power consumption of your connected devices. For example, a 100W combined load would theoretically consume approximately 100Wh per hour, while a 200W load would consume approximately 200Wh per hour. Actual runtime will be lower than a simple calculation because of inverter losses and other operating factors.
For this reason, the Power Tank is best used to keep essential devices running for longer rather than attempting to power an entire high-consumption household at once.
The documented configuration supports up to 400W of solar/PV input. Always ensure that the solar panel voltage, current and total wattage fall within the Power Tank's specified input limits.
The itel Power Tank uses LiFePO4 battery technology and incorporates multiple protection systems to help protect the battery and connected equipment. It also features intelligent fan cooling and operates at less than 45dB at 1 metre under the published conditions.
With its compact all-in-one design, the Power Tank can be used at home, in an office, shop, POS location, small business or other environment where reliable backup electricity is required without the inconvenience of a conventional petrol generator.
Package contents can vary according to the specific itel Power Tank package or seller. The exact accessories supplied should therefore be confirmed at the point of purchase.
The itel Power Tank is designed as a portable, all-in-one power solution and does not require the type of permanent battery-bank installation associated with conventional wall-mounted inverter systems.
For solar-panel installation or any additional electrical setup, ensure that the installation is carried out correctly and that the connected solar equipment complies with the Power Tank's specified input requirements.
Before purchasing, confirm the exact model, battery capacity, inverter output, solar input specifications, included accessories and warranty supplied by the seller. Specifications and package contents may vary between configurations or markets.
Stop depending entirely on petrol whenever the power goes off. With its 1,000Wh LiFePO4 battery, 500W pure sine wave output, solar charging capability and quiet operation, the itel Power Tank gives you a practical way to keep your essential devices running when you need backup power.
Order your itel Power Tank 1000Wh today and enjoy cleaner, quieter and more convenient backup power for your home, office or business.
Double the storage, double the independence. 10.24kWh of Grade-A LiFePO4 capacity in a rack-mount ch
Genuine 620W bifacial panel with dual-glass construction. Captures sunlight from both sides for up t
Tell us your name (optional) and what you need — we reply within minutes during business hours.
Sign in for a faster, personalised experience.
This conversation has been resolved by our team.
No comments yet. Be the first to share your thoughts!